Workout player

    The indoor cycling app built around your training plan

    Ride every workout from your LeCoach training plan right in the app. Your smart trainer holds the watts, the screen shows your power against the target, and the ride is saved and scored the moment you finish.

    The LeCoach workout player at a glance

    • Works with Bluetooth smart trainers, older Tacx models included
    • ERG mode: your trainer holds the target watts of every step
    • In the iPhone and Android apps, and in Chrome or Edge on a computer
    • Heart rate strap, virtual gears and handlebar controllers
    • Make a workout easier or harder, skip a step or turn ERG off as you ride
    • Pauses when you stop pedalling and never loses a ride
    • Saved in LeCoach with an execution score, and sent on to Strava
    • Part of your LeCoach subscription, with a 14-day free trial

    Start

    From your training plan to pedalling in one tap

    Today's indoor cycling workout has a Start button. In the app your smart trainer and heart rate strap connect by themselves, so most days it's Start and go.

    On a day you want a different ride, pick any workout from your training plan, or one you rode before.

    ERG mode

    Your smart trainer holds the watts

    Every step has a target, worked out from your own FTP. In ERG mode the trainer holds it, so all you do is pedal.

    On a day your legs aren't there, take the whole workout down a few percent, skip a step, or turn ERG off and hold the power yourself.

    The screen

    One look tells you where you are

    Your power against the target, the time left in the step, what comes next and the whole workout along the bottom. Every number has its own place and stays there, so a glance is enough in the middle of a hard interval.

    Ten seconds before a change the next step lights up and counts down, with soft beeps you can turn off.

    Interruptions

    It deals with the doorbell

    Stop pedalling and the ride pauses. Start again and the load comes back gently. If your cadence drops too far on a hard step, the trainer eases off until you're spinning again.

    Your ride is kept on your device as you go. If the app closes or your battery runs out, LeCoach offers to carry on where you stopped.

    All-out efforts

    A number to beat when it's all out

    When your training plan asks for a maximal effort, LeCoach shows your best for that length and how far ahead or behind you are while you ride it.

    The result is on screen the second you finish, and it says so when it's a new best.

    Virtual gears

    Shift from your handlebars

    With ERG off you ride on virtual gears. Shift on screen or with a Zwift Play, Zwift Click or Cycplus BC2 controller on your handlebars, so a trainer with a single gear rides like a full bike.

    After the ride

    Saved, scored and on Strava before you're off the bike

    Say how it felt and save. The ride lands on your calendar on the planned workout, with an execution score that tells you how close you rode to the training plan.

    From there it goes on to Strava and the other apps you've connected.

    AI coach

    Your coach, your training plan and your ride in one app

    Ask your AI cycling coach to shorten today's ride and the new version is ready to start a moment later. Afterwards the coach knows how the ride went and how it felt, and uses that for what comes next.

    Your choice

    Zwift, your Garmin and the road work as before

    The workout player is one more way to ride your training plan. Your workouts still sync to the bike computer, watch or indoor app you use, and every ride comes back into LeCoach whichever way you rode it.

    The rest of LeCoach

    The workout player is one part of your coach

    LeCoach is an AI cycling and running coach that works the way a good human coach does. It builds your training plan, follows your training and recovery, suggests changes and tells you why, and answers your questions at any hour.

    Works with Garmin, Wahoo, Zwift and more than 20 other platforms. See everything LeCoach does

    Ride your next workout in LeCoach

    Start a free trial, build your training plan and ride its first workout on your smart trainer.

    Questions about the LeCoach workout player

    What is the LeCoach workout player?

    LeCoach is an AI cycling and running coach, and its workout player is the indoor cycling app inside it. You ride the workouts from your training plan on your smart trainer, the trainer holds the target watts of every step, and the ride is saved in LeCoach with an execution score when you finish.

    Which smart trainers work with the LeCoach workout player?

    Smart trainers that connect over Bluetooth and accept power targets from apps, which covers most trainers of the last few years (often listed as FTMS in the specs). The older Tacx Neo, Neo 2, Neo 2T, Flow and Vortex work too. A heart rate strap is optional.

    Do I still need Zwift or another indoor cycling app to ride LeCoach workouts?

    No. You can ride every workout from your training plan in LeCoach's own workout player. If you like riding in Zwift, Rouvy or MyWhoosh, your workouts still sync there as before, and those rides come back into LeCoach.

    Does the LeCoach workout player work on iPhone, Android and a computer?

    Yes. Use the LeCoach app on iPhone or Android, Chrome or Edge on a computer, or Chrome on an Android phone. Safari and other browsers on an iPhone can't connect to a trainer, so use the app there.

    What is ERG mode, and can I ride without it?

    In ERG mode your smart trainer sets the resistance so you ride at the target watts whatever your cadence. You can turn ERG off at any moment and hold the power yourself with virtual gears, on screen or with a Zwift Play, Zwift Click or Cycplus BC2 controller.

    Do I need a power meter for indoor cycling workouts in LeCoach?

    No. Your smart trainer measures your power. LeCoach needs your FTP to turn each workout into watts, and you set it under Settings.

    Do my rides from the workout player go to Strava and Garmin Connect?

    A saved ride goes to Strava when you've connected Strava to LeCoach, and to Intervals.icu when you've connected that. For Garmin Connect or TrainingPeaks you download the ride file from the activity's menu and add it there.

    Can I ride a workout that's planned for another day?

    Yes. Pick any coming workout from your training plan and LeCoach asks whether to move it to today or keep a copy on its own day. You can also ride a workout you did before.

    Is the workout player included in a LeCoach subscription?

    Yes. The workout player is part of LeCoach, with nothing extra to pay, and you can try everything free for 14 days.